FBI Laboratory Report of Examination (Latent Print), specimen Q56 guitar strap

Document date 14 July 2011

Part 77pages 309–3113 pagesDB Cooper-33671–33673

Open in FBI Vault (Part 77, page 309 of the PDF)
Report a problem

Email this to [email protected]

Id: Cooper-Part-77:309-311

Subject: Cooper Files: Cooper-Part-77:309-311

Document: FBI Laboratory Report of Examination (Latent Print), specimen Q56 guitar strap
Id: Cooper-Part-77:309-311
Page: https://cooper.theunsolved.net/documents/Cooper-Part-77%3A309-311

What is wrong (title, date, type, which pages belong together, copies)?


What does the scan show?

Open in email app

A person reads every report. Corrections are made by hand, to the data — titles, dates, names, which pages belong together — never to the scans, and they can take a while to appear.

FBI 164-81, Vault Part 77 pp. 309–311 (DB Cooper-33671–33673), Report, dated 14 Jul 2011, serial 164A-SE-81 (as read from the transcript) — cooper.theunsolved.net/documents/Cooper-Part-77%3A309-311

7-1 (Rev. 7-10-06)

UNCLASSIFIED

FBI Laboratory 2501 Investigation Parkway Quantico, Virginia 22135

---

REPORT OF EXAMINATION

To: Seattle Squad C-1 SA [redacted]

Date: July 14, 2011

Case ID No.: SE 164A-81-DNA -54

Lab No.: 110330009 QB ABW

Reference: Communication dated March 23, 2011

Your No.:

Title: UNSUB, aka DAN COOPER; NORJAK CAA - HIJACKING

Date specimens received: March 30, 2011

The item listed below was examined in the Latent Print Operations Unit:

Q56 Guitar strap (1B32, E4377945)

---

This report contains the results of the examination of friction ridge prints.

Results of Examinations

The requested latent print examinations were conducted, but no latent prints were detected.

Methods

Items of evidence submitted to the Latent Print Operations Unit for examination may be examined visually, examined with various light sources, and/or processed with chemicals and

---

1 - 164A-SE-81

Page 1 of 3

UNCLASSIFIED

DB Cooper-33671

UNCLASSIFIED

---

powders to detect the presence of latent friction ridge prints. The specific sequence of examinations and processes depends upon the nature of the evidence.

Friction ridge print examinations are conducted using the Analysis, Comparison, Evaluation, and Verification methodology (ACE-V), which includes an assessment of the quantity and quality of the information present. The steps of ACE-V are applied to each examination as appropriate.

Analysis is the assessment of a friction ridge print to determine if sufficient reliable details are present to conduct a comparison with another print and to reach an identification conclusion. If these conditions are met, the print is determined to be "of value".

Comparison is the direct side-by-side observation of friction ridge prints of value to determine whether or not the information in two prints is in agreement.

Evaluation is the formulation of a conclusion based on the information gathered during the analysis and comparison of the friction ridge prints.

Conclusions that can be reached are as follows:

• Identification - the determination that there is sufficient quality and quantity of detail in agreement to conclude that two friction ridge prints originated from the same source.

• Exclusion - the determination that there is sufficient quality and quantity of detail in disagreement to conclude that two friction ridge prints did not originate from the same source.

• Inconclusive - the determination that corresponding areas of friction ridge prints are absent and/or unreliable and therefore cannot be identified or excluded.

Verification is the independent application of the analysis, comparison, and evaluation phases of the ACE-V methodology to a friction ridge print by another examiner.

---

Interpretations

Due to the many factors involved in the deposition of a friction ridge print, neither the absence of a friction ridge print on evidence nor the exclusion of a friction ridge print with a given source, disassociate that source from having touched the evidence.

---

Page 2 of 3

110330009 QB ABW

---

UNCLASSIFIED

---

DB Cooper-33672

UNCLASSIFIED

---

Remarks

To date, no specimens have been received in the Latent Print Operations Unit for examination in Case ID number 164A-SE-81.

For questions about the content of this report, please contact Physical Scientist/Forensic Examiner [REDACTED]

For questions about the status of your submission, including any remaining forensic examinations, please contact Request Coordinator [REDACTED]

The specimen is being returned under separate cover. The supporting records for the opinions and interpretations expressed in this report are retained in the FBI files.

---

b6 b7C b7E

---

[REDACTED SIGNATURE BLOCK]

Latent Print Operations Unit

---

This report contains the opinions/interpretations of the examiner(s) who issued the report.

Page 3 of 3

110330009 QB ABW

UNCLASSIFIED

---

DB Cooper-33673

Serials: 110330009, 110330009 QB ABW, 164A-SE-81, E4377945, SE 164A-81-DNA-54