Part 79, page 267
FBI 164-81, Vault Part 79 p. 267 (DB Cooper-34691), Form — cooper.theunsolved.net/parts/Cooper-Part-79/pages/267
Transcript
The scan is the source; the transcript is machine-generated from it.
FEDERAL BUREAU OF INVESTIGATION UNITED STATES DEPARTMENT OF JUSTICE WASHINGTON, D.C. 20537
APPLICANT
---
1. LOOP
CENTER OF LOOP DELTA
THE LINES BETWEEN CENTER OF LOOP AND DELTA MUST SHOW
2. WHORL
DELTAS
THESE LINES RUNNING BETWEEN DELTAS MUST BE CLEAR
3. ARCH
ARCHES HAVE NO DELTAS
---
To obtain classifiable fingerprints: 1. Use printer's ink. 2. Distribute ink evenly on inking slab. 3. Wash and dry fingers thoroughly. 4. Roll fingers from nail to nail, and avoid allowing fingers to slip. 5. Be sure impressions are recorded in correct order. 6. If an amputation or deformity makes it impossible to print a finger, make a notation to that effect in the individual finger block. 7. If some physical condition makes it impossible to obtain perfect impressions, submit the best that can be obtained with a memo stapled to the card explaining the circumstances. 8. Examine the completed prints to see if they can be classified, bearing in mind that most fingerprints fall into the patterns shown on this card (other patterns occur infrequently and are not shown here).
---
This card for use by:
1. Law enforcement agencies in fingerprinting applicants for law enforcement positions and applicants for licenses or permits required by local ordinance or official regulation. The reason for fingerprinting must be shown in appropriate block.
2. U.S. Government agencies in connection with clearances. Identity of private contractor should be shown in space "Company and Address." The contributor is the name of agency submitting the fingerprint card to the FBI.
FBI number, if known, should always be furnished in appropriate space.
---
LEAVE THIS SPACE BLANK
---
FD-258 (Rev. 4-22-69)
DB Cooper-34691