Part 86, page 259
DB Cooper-38336Serials SE 164-81-1A
Document date 1 December 1978
FBI 164-81, Vault Part 86 p. 259 (DB Cooper-38336), Form, dated 1 Dec 1978 — cooper.theunsolved.net/parts/Cooper-Part-86/pages/259
Transcript
The scan is the source; the transcript is machine-generated from it.
LET | CHANGE | DATE | BY U | REVISED NOTE 22 & DETAIL FOR COVERING PAINT (M) | 3-22-76 | b6 b7C
---
SE 164-81-1a (b6b) KEEP ATTACHED TO EXHIBIT
---
8C11-33163-12 LOGO
---
NOTES CONT. 19. LEAVE A 1.5 WIDE BARE METAL STRIPE AROUND ALL COCKPIT & EYEBROW WINDOWS 20. EXPOXY PRIMER PER BMS-10-79 (DESOTO 8N513-731 OR EQUIV) AND FLEXIBLE POLYURETHANE ENAMEL COLOR BAC 7025 GREY GLOSS PER BMS 10-60 TYPE II OPTIONAL TO COROGARD. 21. PAINTING OF UPPER SURFACE OF HORIZONTAL STABILIZER OPTIONAL DEPENDING ON CONDITION. 22. PAINT ENTIRE INSPAR SKIN FROM BBL 70.5 TO WS 760.5 BETWEEN FRONT & REAR SPAR (OPTIONAL) PAINTING FASTENER ROWS 5.6 6.5 8 ONLY (PREFERRED) APPLY BMS 10-79 PRIMER (S/N 18/-PR-720) BMS 5-95 TYPE 16 SEALANT (S/N 185-SE-195) 2 BAND AT FASTENER ROWS ONLY AND BMS 10-60 TYPE II GREY ENAMEL (S/N 18/-EN-599)(FREE CORROSION PREVENTION MANUAL D6-41910 PART II 57-30-27 FIG 4) 23. PLACARDS BAC 27DPA152, BAC27DPA151, BAC27DPA 66 & BAC27DPA138 ARE NOT REQUIRED ON 727C A/C (488-499) WHICH HAVE BEEN MODIFIED PER E.O. 35166 SECT. II & III. 24. REF. NWA DWG 4011-34338 - MAINTENANCE MARKINGS & PROTECTIVE PAINT.
---
1/25/81-2 KIT.
---
WHITE SEMI-GLOSS POLYURETHANE ENAMEL MA
---
DB Cooper-38336
---
1-1.0 [-.25