Part 86, page 261
Document date 1 December 1978
FBI 164-81, Vault Part 86 p. 261 (DB Cooper-38338), Form, dated 1 Dec 1978 — cooper.theunsolved.net/parts/Cooper-Part-86/pages/261
Transcript
The scan is the source; the transcript is machine-generated from it.
LET | CHANGE | DATE | BY A | ADDED OVERWING ESCAPE POLITE | [illegible] | b6 B | ADDED BAC MOL 24Y, BACMOL 24Y F | [illegible] | b7C BACM9L22 DECALS C | ADDED NOTE 19 | [illegible] D | BAC 751 GRAY WAS BAC 7051 | [illegible] E | ADDED NOTE 20 | 3/2/73 F | ADDED NOTE 21 | [illegible] G | ADDED NOTES 22 F 23, DETAIL [guess: XI] | 5/17/74 H | DELETED 2" STRIPE AROUND CAPT. FLOOR SLIDING | 2/10/75 WINDOW, REVISED NOTE 19, REF. BAC TWX NWMSE 7(RE3721[guess: 40])
---
SE 1(A) - 8/1/[guess: 12] (666) KEEP ATTACHED TO EXHIBIT
---
PAINT THE LOWER SURFACE OF HORIZONTAL STABILIZER & THE LOWER SURFACE OF THE ELEVATOR AND TAB. MAY BE PAINTED BUT MUST BE REBALANCED OR BALANCE CHECKED AND PLACARD [guess: EBAC] [guess: 15K] GRAY ENAMEL)
---
[partial aircraft diagram visible] AIN BAQ 502 LOE GLOSS
---
NOTE 1. ALL EXPOSED PRIMER SURFACES & THE DECORATIVE PATTERNS SHALL RECEIVE ONE COAT OF BMS 10-11 TYPE 2 ENAMEL COLOR GREY BAC 707 GLOSS APPLIED PER DG-1816. EXPOSED SURFACES ARE DEFINED AS EXTERIOR AREAS WHEN ALL ACCESS DOORS ARE IN PLACE & CONTROL SURFACES ARE IN FAIRED POSITION. 2. DO NOT PAINT RUBBER OR MOHAIR SEALS, OR STAINLESS STEEL RUB STRIPS THRESHOLDS OR ANODIZED HANDLES OR DOOR HANDLE PANS OR DUMMY WINDOW PLATES. 3. DO NOT PAINT 4. REFERENCE DWG BAC 65-39747 5. NWA FN 7C23-3/726-2 THPU-11 AS REQ. (PAINT PER EWG 7C23-3/726 OPT) 6. NWA FN 7C23-2/721-2 THRU-14 AS REQ. (PAINT PER DWG 7C22-2/721 OPT) [guess: 8]. EDGE SEAL DECALS APPLIED TO BARE METAL & PAINTED SURFACES WITH "SCOTCHCAL" BRAND EDGE SEALER #3950. PRE-MASKED DECALS APPLIED PRIOR TO PAINTING DO NOT REQUIRE EDGE SEALING. [guess: 8b]. BMS 10-11 PRIMER & ENAMEL [guess: 9a]. ALL 727A/727C AIRCRAFT [guess: 10]. 727C AIRCRAFT ONLY [guess: 11]. POLITE RADOME TO PAINT SHOP. DO NOT
---
DB Cooper-38338